ULTRASONIC PCB CLEANER & FLUX REMOVER
A specialist, non flammable, water based formulation for cleaning and removing flux from printed circuit boards and electronic components and equipment in Ultrasonic baths. In addition it safely removes contaminants including general soiling, carbon and grease etc. Effective cleaner for use on heat sinks, circuit boards, motors, chip carriers, metal housings etc.
The product is safe to use on all materials on a circuit board but always check compatibility first.
- Safe to use on all printed board components.
- Deep cleans removing flux, dirt and grease.
- Non-flammable and non corrosive
- Leaves no residue
- Excellent stain remover.
- Concentrated for economical use.
- For professional and amateur use.
How To Use
Concentrate is added to water at a rate of 1 part concentrate to 10 parts of deionised water. Operating temperature of bath should be set between 50 – 80 °C. Allow two minutes for the tank to degas before immersing parts
After cleaning rinse all surfaces thoroughly with clean water and air dry. The bath should be changed regularly when the solution becomes dirty.